• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

Nexus Technology, Inc.

Enabling Innovation for Over 30 Years

MENUMENU
  • Products & Services
        • Memory Analyzers
          • Overview
          • MA5100 Series
          • MA4100 Series
        • Memory Interposers
          • LPDDR5 Mobile Memory
          • LPDDR4 Mobile Memory
          • LPDDR3 Mobile Memory
          • LPDDR2 Mobile Memory
          • DDR5 Main Memory
          • DDR4 Main Memory
          • DDR3 Main Memory
          • DDR2 Main Memory
          • Flash Memory
        • Probes
          • Analyzer Probes
          • Serial
          • Probing Adaptors
        • Serial Analyzers
          • RapidIO Serial Analyzer
        • Services
          • Attachment Service
          • Custom Interposers
          • Custom Software Support
        • Legacy Products
          • Parallel Bus
          • DDR1 Main Memory
          • GDDR5 Graphic Memory
          • LPDDR1 Mobile Memory
        • All Products
  • Technologies
    • Xcelerate™ Series Interposer Family
    • XH Series Interposer Technology
    • EdgeProbe™ Interposer Technology
    • Target Socketed Interposer Technology
    • Direct Attach Interposer Technology
    • Electrical Analysis
    • Protocol / Compliance Analysis
  • News
    • All News
    • Videos
    • Press Releases
  • Support
    • Frequently Asked Questions
    • Leave a Message / Create Support Ticket
    • Live Chat
  • About Nexus
    • Contact Information
    • Conflict Minerals Statement
    • WEEE and RoHS Compliance
    • About Nexus

Interposer

New Product – DDR5-12000 Xcelerate™ Series x16 Interposer

September 25, 2026 By Nexus

Nexus Technology is proud to announce the Xcelerate™ Series DDR5-12000 102-/106-Ball BGA interposer enabling high-speed testing and debug of DDR5 using an oscilloscope.

Feature Highlights

  • DDR5 up to 12.0 GT/s
  • 102-ball or 106-ball x16
  • Easy probing with an oscilloscope
  • JEDEC Standard JESD79-5
  • Xcelerate™ Series
  • Small keep-out volume (KOV)
  • Integrated riser
  • S-Parameters for system simulation
  • Oscilloscope de-embedding s-parameters
  • Installs with standard BGA Rework
  • Attachment and analysis services available
  • Made in the USA

Key Features

DDR5-12000: Supports DDR5 speeds exceeding DDR5-12000 (12.0 GT/s).

Robust Signal Access: Provides low-loss, high-fidelity probing points for critical signals, including data (DQ), command/address (CA), and clock lines, ensuring minimal impact on system performance during testing.

Xcelerate® Series – Flexible Design: Available in multiple configurations to accommodate various package types (e.g., BGA, PoP) and test setups, offering compatibility with industry-standard oscilloscopes and protocol analyzers.

Enhanced Durability: Built with high-quality materials to withstand repeated mating cycles and maintain signal reliability in demanding lab environments.

Streamlined Integration: Designed for easy installation between the memory and host systems, reducing setup time and complexity for test engineers.

Xcelerate™ Series Interposer

Xcelerate Text

This interposer is a member of the Xcelerate™ Series of interposers. Engineered for performance and precision, Nexus Technology’s Xcelerate™ Series interposers support data rates exceeding 10 Gbps (12.0 Gbps for this DDR5-A-CDA-106-XL interposer), enabling seamless signal access for oscilloscopes, logic analyzers, and other advanced test equipment. The Xcelerate™ series of interposers empowers engineers to validate, debug, and optimize next-generation memory systems with unparalleled accuracy and efficiency.

Why It Matters

As memory technologies like LPDDR5/6 and DDR5/6 push the boundaries of speed and efficiency—driven by applications in AI, 5G, and high-performance computing—the need for accurate, non-intrusive testing solutions has never been greater. Traditional probing methods often introduce noise or fail to capture signals at multi-gigabit rates. Nexus Technology’s interposers address these challenges by providing a reliable bridge between memory devices and test equipment, enabling engineers to accelerate time-to-market while ensuring product quality.

About Nexus Technology

Nexus Technology is an industry leader in innovative memory test and measurement solutions. Nexus Technology was founded in 1991 with a mission to support validation and debug of e

Filed Under: New Product, Press Release Tagged With: DDR5, Direct Attach, Interposer, Oscilloscope, Xcelerate

New Product – DDR5-12000 Xcelerate™ Series x4/x8 Interposer

April 3, 2026 By Nexus

DDR5-A-CDA-82-XL Interposer

Nexus Technology is proud to announce the Xcelerate™ Series DDR5-12000 82-/78-Ball BGA interposer enabling high-speed testing and debug of DDR5 using an oscilloscope.

Feature Highlights

  • DDR5 up to 12.0 GT/s
  • 82-ball or 78-ball x4/x8
  • Easy probing with an oscilloscope
  • JEDEC Standard JESD79-5
  • Xcelerate™ Series
  • Small keep-out volume (KOV)
  • Integrated riser
  • S-Parameters for system simulation
  • Oscilloscope de-embedding s-parameters
  • Installs with standard BGA Rework
  • Attachment and analysis services available
  • Made in the USA

Key Features

DDR5-12000: Supports DDR5 speeds up to DDR5-12000 (12.0 GT/s).

Robust Signal Access: Provides low-loss, high-fidelity probing points for critical signals, including data (DQ), command/address (CA), and clock lines, ensuring minimal impact on system performance during testing.

Xcelerate® Series – Flexible Design: Available in multiple configurations to accommodate various package types (e.g., BGA, PoP) and test setups, offering compatibility with industry-standard oscilloscopes and protocol analyzers.

Enhanced Durability: Built with high-quality materials to withstand repeated mating cycles and maintain signal reliability in demanding lab environments.

Streamlined Integration: Designed for easy installation between the memory and host systems, reducing setup time and complexity for test engineers.

Xcelerate™ Series Interposer

Xcelerate Text

This interposer is a member of the Xcelerate™ Series of interposers. Engineered for performance and precision, Nexus Technology’s Xcelerate™ Series interposers support data rates exceeding 10 Gbps (12.0 Gbps for this DDR5-A-CDA-82-XL interposer), enabling seamless signal access for oscilloscopes, logic analyzers, and other advanced test equipment. The Xcelerate™ series of interposers empowers engineers to validate, debug, and optimize next-generation memory systems with unparalleled accuracy and efficiency.

Why It Matters

As memory technologies like LPDDR5/6 and DDR5/6 push the boundaries of speed and efficiency—driven by applications in AI, 5G, and high-performance computing—the need for accurate, non-intrusive testing solutions has never been greater. Traditional probing methods often introduce noise or fail to capture signals at multi-gigabit rates. Nexus Technology’s interposers address these challenges by providing a reliable bridge between memory devices and test equipment, enabling engineers to accelerate time-to-market while ensuring product quality.

About Nexus Technology

Nexus Technology is an industry leader in innovative memory test and measurement solutions. Nexus Technology was founded in 1991 with a mission to support validation and debug of emerging technologies. Nexus Technology can be reached at support@nexustechnology.com, toll free at 877-595-8116 or outside the US/Canada at 603-329-3083.

Filed Under: New Product, Press Release Tagged With: DDR5, Direct Attach, Interposer, Oscilloscope, Xcelerate

New Oscilloscope Interposer – LPDDR5X 315-Ball EdgeProbe

January 19, 2024 By Nexus Technology, Inc.

Fast, reliable access. Annoucing 8.5 GT/s oscilloscope interposer support for LPDDR5X and LPDDR5 315-ball BGAs.

  • All major oscilloscope vendors supported
  • 315-ball LPDDR5(X) 2×16 BGA Component
  • JEDEC standard JESD209-5
  • Easily access signals: EdgeProbe Design
  • Embedded tip resistors
  • Risers available
  • S-Parameters for de-embedding and simulation
  • Install with standard BGA rework
  • Attachment & analysis services available
LPDDR5 315 Ball EdgeProbe Interposer

LPDDR5X Oscilloscope Interposer – 315-ball

XH Series

Leading edge technology includes oscilloscope tip resistors designed inside the interposer on all signals for speeds exceeding 8.5GT/s.

Easy Signal Access

Signals are brought out to pads for oscilloscope probing with multiple ground pads for easy signal monitoring.

LPDDR4 Direct Attach on Target


Risers Available

Used to elevate the interposer above surrounding components, risers are installed along with the interposer using standard BGA reword practices.

Attachment & Testing Service

Attachment Service

For each interposer, the Attachment Service will install a component to the interposer and the interposer to the target. Other accessories may also be attached (risers, sockets, etc.).

Target Boot & Basic Functionality

For each target, this service will power on and ensure functionality of the target with the interposer(s) installed.

Add Digital Access

Add digital analysis using a PRB-FL probe and an MA51x0 series logic analyzer and real time protocol analysis instrument.


Learn More

Learn more about LPDDR5-315 Interposer
Learn more about our LPDDR5 Interposer Products
Learn more about our LPDDR5 Logic Analyzer / Protocol Analyzer

Contact Us: Click Here

Filed Under: New Product, Press Release Tagged With: EdgeProbe, Interposer, LPDDR5, Oscilloscope

LPDDR5X Oscilloscope Probing – 441-Ball

February 22, 2022 By Nexus Technology, Inc.

Fast, reliable access. Announcing 8.5GT/s oscilloscope interposer support for LPDDR5X and LPDDR5 441-ball BGAs.

  • All major oscilloscope vendors supported
  • 441-ball LPDDR5(X) 4×32 BGA Component
  • JEDEC standard JESD209-5
  • Easily access signals
  • Embedded tip resistors
  • Risers available
  • S-Parameters for de-embedding and simulation
  • Install with standard BGA rework
  • Attachment & analysis services available
LPDDR5 441-ball oscilloscope interposer

LPDDR5X Oscilloscope Interposer – 441-ball

XH Series

Leading edge technology includes oscilloscope tip resistors designed inside the interposer on all signals for speeds exceeding 8.5GT/s.

Easy Signal Access

Signals are brought out to pads for oscilloscope probing with multiple ground pads for easy signal monitoring.

LPDDR4 Direct Attach on Target


Risers Available

Used to elevate the interposer above surrounding components, risers are installed along with the interposer using standard BGA reword practices.

Attachment & Testing Service

Attachment Service

For each interposer, the Attachment Service will install a component to the interposer and the interposer to the target. Other accessories may also be attached (risers, sockets, etc.).

Target Boot & Basic Functionality

For each target, this service will power on and ensure functionality of the target with the interposer(s) installed.

Add Digital Access

Add digital analysis using a PRB-FL probe and an MA51x0 series logic analyzer and real time protocol analysis instrument.


Learn More

Learn more about LPDDR5-441 Interposer
Learn more about our LPDDR5 Interposer Products
Learn more about our LPDDR5 Logic Analyzer / Protocol Analyzer

Contact Us: Click Here

Filed Under: New Product, Press Release Tagged With: Direct Attach, Interposer, LPDDR5, Oscilloscope

New Oscilloscope Interposer – LPDDR5X 297-Ball

July 22, 2020 By Nexus Technology, Inc.

Fast, reliable access. Annoucing 8.5 GT/s oscilloscope interposer support for LPDDR5X and LPDDR5 315-ball BGAs.

  • All major oscilloscope vendors supported
  • 297-ball LPDDR5(X) 2×16 BGA Component
  • JEDEC standard JESD209-5
  • Easily access signals
  • Embedded tip resistors
  • Risers available
  • S-Parameters for de-embedding and simulation
  • Install with standard BGA rework
  • Attachment & analysis services available

LPDDR5X Oscilloscope Interposer – 297-ball

XH Series

Leading edge technology includes oscilloscope tip resistors designed inside the interposer on all signals for speeds exceeding 8.5GT/s.

Easy Signal Access

Signals are brought out to pads for oscilloscope probing with multiple ground pads for easy signal monitoring.

LPDDR4 Direct Attach on Target


Risers Available

Used to elevate the interposer above surrounding components, risers are installed along with the interposer using standard BGA reword practices.

Attachment & Testing Service

Attachment Service

For each interposer, the Attachment Service will install a component to the interposer and the interposer to the target. Other accessories may also be attached (risers, sockets, etc.).

Target Boot & Basic Functionality

For each target, this service will power on and ensure functionality of the target with the interposer(s) installed.

Add Digital Access

Add digital analysis using a PRB-FL probe and an MA51x0 series logic analyzer and real time protocol analysis instrument.


Learn More

Learn more about LPDDR5-297 Interposer
Learn more about our LPDDR5 Interposer Products
Learn more about our LPDDR5 Logic Analyzer / Protocol Analyzer

Contact Us: Click Here

Filed Under: New Product, Press Release Tagged With: Direct Attach, Interposer, LPDDR5, Oscilloscope

New Oscilloscope Interposer – LPDDR5X 496-Ball

March 24, 2020 By Nexus Technology, Inc.

Fast, reliable access. Annoucing 8.5 GT/s oscilloscope interposer support for LPDDR5X and LPDDR5 315-ball BGAs.

  • All major oscilloscope vendors supported
  • 496-ball LPDDR5(X) 4×16 BGA Component
  • JEDEC standard JESD209-5
  • Easily access signals
  • Embedded tip resistors
  • Risers available
  • S-Parameters for de-embedding and simulation
  • Install with standard BGA rework
  • Attachment & analysis services available

LPDDR5X Oscilloscope Interposer – 496-ball

XH Series

Leading edge technology includes oscilloscope tip resistors designed inside the interposer on all signals for speeds exceeding 8.5GT/s.

Easy Signal Access

Signals are brought out to pads for oscilloscope probing with multiple ground pads for easy signal monitoring.

LPDDR4 Direct Attach on Target


Risers Available

Used to elevate the interposer above surrounding components, risers are installed along with the interposer using standard BGA reword practices.

Attachment & Testing Service

Attachment Service

For each interposer, the Attachment Service will install a component to the interposer and the interposer to the target. Other accessories may also be attached (risers, sockets, etc.).

Target Boot & Basic Functionality

For each target, this service will power on and ensure functionality of the target with the interposer(s) installed.

Add Digital Access

Add digital analysis using a PRB-FL probe and an MA51x0 series logic analyzer and real time protocol analysis instrument.


Learn More

Learn more about LPDDR5-496 Interposer
Learn more about our LPDDR5 Interposer Products
Learn more about our LPDDR5 Logic Analyzer / Protocol Analyzer

Contact Us: Click Here

Filed Under: New Product, Press Release Tagged With: Direct Attach, Interposer, LPDDR5, Oscilloscope

  • Page 1
  • Page 2
  • Go to Next Page »

Primary Sidebar

Copyright © 2026 Nexus Technology, Inc.