NEX-VME64

NEX-VME64 / NEX-VME64X Adapter Board
The NEX-VME64 / NEX-VME64X adapter board has Mictor connectors for connecting the VME, VME64 and VME64X bus to a Tektronix Logic Analyzer. Right angle adapters (NEX-HDRT) are also available from Nexus Technology when a low profile connection is needed. The following VME64X signals are routed to a pad area that can have an included right angle header installed for connection to the Tektronix TLA. This connection would be made by using the appropriate Tektronix probe (P6417/P6418/P6810): Z1, Z3, Z5, Z7, Z9, Z11, Z13, Z15, Z17, Z19, Z21, Z23, Z25, Z27, Z29, Z31, D5, D8, D9, D10, D11, D13, D15, D17, D19, D21, D23, D25, D27, D29.

Up to 64 User Defined and Reserved signals can also be monitored.

NEX-VME64 Support
P0 connectors are not installed but are provided for future use.

NEX-VME64X Support
P0 connectors installed.

Full Acquisition
VME, VME64 or VME64X bus signals including the seven IRQ’s are acquired by the TLA. This mode requires at a minimum a TLA acquisition module with 136-channels to connect to the four Mictor connectors on the NEX-VME64X adapter. Merged acquisition cards are also usable to enable acquiring more than 136 VME signals.

Limited Signal Acquisition
The TLA channel count requirement can be reduced from 136-channels to 102-channels by looking at only one of the seven IRQ signals on the VME, VME64 or VME64X bus. The IRQ to be monitored is jumper selectable on the NEX-VME64X. If Limited Signal Acquisition mode is used the user would connect the TLA to three of the four available Mictor connectors on the NEX-VME64X adapter.

LAs Supported / Configuration

VME / VME64 / VME64X (Limited Signal Acquisition)

TLA52xx or TLA6xx series Logic Analyzer:

  • V3.2 or later software
  • 102- or 136-channels of acquisition
  • Three (3x) P6434 Probes
  • Optional P6417 or P6418 probes for User Defined Signal acquisition

or

TLA700 series Logic Analyzer

  • V3.2 or later software
  • One of the following
    • One (1x) TLA7x3/4 acquisition module
      • Three (3x) P6434 probes
      • Optional TLA7x3/4 module (with P6417 or P6418 probes) or TLA7Ax3/4 module (with P6810 probes) required for acquisition of User Defined Signals and/or Extended VME64X signals1

    • or, One (1x) TLA7Ax3/4 acquisition module

      • Three (3x) P6860 probes
      • Three (3x) Tektronix Mictor-to-Compression Adapters
      • Optional TLA7x3/4 module(with P6417 or P6418 probes) or TLA7Ax3/4 module (with P6810 probes)required for acquisition of User Defined Signals and/or Extended VME64X signals1

VME64X(Full Acquisition)

TLA52xx or TLA6xx series Logic Analyzer:

  • V3.2 or later software
  • 136-channels of acquisition
  • Four (4x) P6434 Probes
  • Optional P6417 or P6418 probes for User Defined Signal acquisition

or

TLA700 series Logic Analyzer

  • V3.2 or later software
  • One of the following
    • One (1x) TLA7x4 acquisition module
      • Four (4x) P6434 probes
      • Optional TLA7x3/4 module (with P6417 or P6418 probes) or TLA7Ax3/4 module (with P6810 probes) required for acquisition of User Defined Signals and/or Extended VME64X signals1

    • or, One (1x) TLA7Ax4 acquisition module

      • Four (4x) P6860 probes
      • Four (4x) Tektronix Mictor-to-Compression Adapters
      • Optional TLA7x3/4 module (with P6417 or P6418 probes) or TLA7Ax3/4 module (with P6810 probes) required for acquisition of User Defined Signals and/or Extended VME64X signals1

Ordering Information

Please send quote requests to quotes@nexustechnology.com. Purchase orders can be faxed to 877-595-8118.

All prices are US dollars only. We accept Visa, MasterCard, American Express and JCB. NET30 terms are available for established accounts.